Miniplane Top 80 E-Props 125cm 2 blade

E-PROPS PLUG'n'FLY propeller 2-blades for paramotor / paratrike (PPG)

Model for engine : Miniplane Top80 reducer 1:3.84 (19-73)
Configuration : pusher
Blades number : 2
Diameter : 125 cm (49.2 in)

Drilling pattern : 4 M6 d60mm (4 screws dia 6 mm on a circle 60 mm diameter)

Center hole : 25mm

Rotation sense : Right (clockwise) in the direction of flight
Total weight of the prop = 500 g (1.1 lb)
SCIMITAR design

100% in full carbon braid : Helical Continuous Fibers 
Reinforced leading edge protection in Nanostrength additive, with high energy absorbing capability
Fixed pitch, easy to assemble
Propeller delivered ready to be mounted, with manual, without screws


* about 500 g for a 125 cm diameter 2-blade
* more resistant propeller => faster acceleration and deceleration of the engine (the propeller is more reactive, it stops much more fast, that is fewer risks of break in case of shock in the propeller), less stored kinetic energy, thus fewer damages in case of impact.
* Comfort increased for the pilot = > less mass propeller on the back, fewer gyroscopic efforts, less couple 
* Better functioning of the engine = > fewer constraints on the reducer, fewer vibrations due to the functioning propeller 


 
DISASSEMBLED 


* excellent for storage and transport
* very easy to assemble and disassemble
* simple replacement of one blade


Please choose carefully.  Due to the delicate nature of propellers, returns are limited.  We cannot accept returns on propellers once they have been bolted to the engine.  We will not accept returns on propellers that have been installed or flown even once.